70
Chapter 4 Basic operations
4.6 Replaying the image
Quick replay of most recent image
Press the [VIEW] button in the live screen to display the most recently recorded
image in full screen (the retrieve screen).
Displaying the thumbnail screen and selecting the image
to be replayed
The example describes displaying images recorded on a USB flash drive for
recording images.
1 Insert the USB flash drive for recording images that contains the
image to be displayed in the USB connector.
2 Press the [VIEW] button for at least 2 seconds to open the
thumbnail screen.
The thumbnail screen shows the capacity of the USB flash drive for recording
images that is available in % (see “Remaining media capacity” below).
The MOVIE indicator is displayed for moving images, the measurement indicator
is displayed for images with stereo measurement results (see below).
MOVIE image
indicator
Thumbnail selection frame
Remaining media
capacity
Measurement
indicator
To Next Page
Loading...
