84
Chapter 5 Menu operations and functions
Switchover between Negative and Positive of
Observation Image (LX Only)
Enable the negative-positive switchover function
1 Press the [MENU/EXIT] button to display the menu screen.
2 On the main menu select icon and push the [MEAS/ENTER]
joystick.
A "Record" menu will be displayed.
3 Move the [MEAS/ENTER] joystick up and down to select the
icon and press the [MEAS/ENTER] joystick.
A [NEGATIVE/POSITIVE] window will be displayed.
4 Move the [MEAS/ENTER] joystick up and down to select "ON" and
press the [MEAS/ENTER] joystick.
The setting has been completed. Pressing the [LIVE/GAIN] button closes the menu and an
observation image will be displayed.
Switch over between negative and positive of the observation image
1 Pressing the [MEAS/ENTER] joystick on the Live screen allows you
to switch over between the negative display and positive display of
the observation image.
NOTE
• You can not use this function in measurement.
To Next Page
Loading...
