49
Chapter 3 Preparation and inspection before observation
6 You can use the insertion tube wrap belt on the control unit to
secure the insertion tube. (For 4-mm and 6-mm types)
You can use the insertion tube wrap belt on the handle to secure
the insertion tube. (For 8.5-mm type)
CAUTION
• For the 8.5-mm type, do not loop the insertion tube and hang it on the control unit's joystick
guard. Always attach it to the handle of the of the main unit with the insertion tube wrap belt.
Removing the strap
To remove the strap, press the hook lever of the shoulder strap as you unhook
the strap from the main unit strap ring or strap bracket.
To Next Page
Loading...
