55
Chapter 4 Basic operations
CAUTION
• Repair is required if the joystick shaft is bent or if the knob comes off. Contact Olympus.
• The angulation movement is interlocked with the angle and direction of the [ANGLE] joystick
movements.
Checking the angulation lock
1 Remove the stopper.
2 While the [ANGLE LOCK] lever is pulled out and locked, confirm
that angulation remains locked even when you remove your finger
from the [ANGLE] joystick.
3 Confirm that the [ANGLE LOCK] lever unlocks when you press it
down again.
4 If you are unable to operate the angulation lock, it means that a
stopper is installed. The stopper keeps the [ANGLE LOCK] lever
from being raised inadvertently.
To Next Page
Loading...
