Olympus IPLEX LX Series - 8.2 Replacing the battery

120
Chapter 6 Measurement procedures (LX only)
Point to line
This mode allows for measuring the distance from a measurement point to the
reference line defined by two reference points.
Depth
This mode allows for measuring the distance from a measurement point to the
reference plane defined by three reference points. It indicates depth and height.
Height is indicated by a positive value and depth is indicated by a negative
value.
Point to line
Reference point
Perpendicular
distance
Measurement point
Reference line
Depth
Reference point
Reference point
Depth or height
Reference
plane
Measurement point
Reference point