151
Chapter 10 Specifications
Measurement
function
(Expanded
function LX
only)
Measurement types Stereo measurement:
When a stereo optical adapter is used.
Spot ranging:
When a stereo optical adapter is used.
measurement
method
Distance Distance between two points indicated on the screen.
Area/Lines
• Total length of lines connecting multiple points
(max. 20 points) indicated on the screen.
• Area of a closed figure formed by indicating
multiple points.
Point to line Distance from a point to a line (reference line) that is
defined by indicating two points on the screen.
Depth Distance from a point to a plane that is defined by indicating
three points on the screen.
Displaying the measurement results
• Normally, displays measurement results for
the measurement point indicated by the
cursor.
• Up to 3 measurement results can be
displayed.
Spot ranging
• Spot ranging indicates approximate value of
the distance from the tip of the scope to the
object on screen specified by cursor.
• The distance is indicated via numerical value
and color-coded bar.
Recording
• It is possible to record up to 3 groups of
measurement results on the measurement
screen.
• When measurement results exist, pressing
and holding the [FRZ/REC] button on the
remote controller records the image together
with the measurement results.
Restrictions
• The object distance measurement result is not
recorded.
• The stereo optical adapter can be used by
registering it as a new stereo adapter setup.
• Recommended measurement range for
stereo measurement up to 15 mm
Possible measurement range up to 30 mm
• One measurement environment each can be
entered for forward view and side view.
To Next Page
Loading...
