DMTA-20043-01EN [U8778624], Rev. B, May 2013
Compatibility Tables 69
Appendix: Compatibility Tables
Always use equipment and accessories that meet Olympus specifications. Using
incompatible equipment can result in a malfunction, equipment damage, or injury.
This appendix presents the software and accessories that are compatible with the
OmniScan SX (see Table 14 on page 69 and Table 15 on page 70).
The software versions mentioned in Table 14 on page 69 were the versions available at
the time of the publication. Subsequent qualified versions will also be compatible.
Table 14 OmniScan SX software compatibility
Model Acquisition Analysis
UT MXU 4.1 OmniPC 4.1
TomoView 2.10R5
PA MXU 4.1
OmniPC 4.1
TomoView 2.10R5
To Next Page
Loading...
