12
1. Do not leave stains or fingerprints on the lenses. If they get dirty,
blow away dust with a commercially available blower and gently
wipe the lens or filter with a piece of cleaning paper (or clean
gauze).
For cleaning fingerprints and oil stains, slightly moisten a piece of
cleaning paper with commercially available absolute alcohol and
wipe them off with it.
Since the absolute alcohol is highly flammable, it must
be handled carefully. Be sure to keep it away from open
flames or potential sources of electrical sparks – for
example, electrical equipment that is being switched on
or off, which could cause ignition of a fire.
Also, remember to always use absolute alcohol only in a
well-ventilated room.
2. Do not use organic solvents, which cause painted and plastic
parts to deteriorate. Do not use organic solvents to clean device
components other than the glass components. To clean them,
use a lint-free, soft cloth slightly moistened with a diluted neutral
detergent.
3. When cleaning the base unit of the frame, use the cleaner
dedicated to the stone surface plate.
4. After use, return the stage to the center position and lock the clutch
to maintain the stage accuracy. And do not place a heavy object on
the stage.
5. After using the system, set the main switch to "
" (OFF), wait for the
control box and power supply unit to cool down sufficiently, and
keep it covered with a dust cover during storage.
Recommended cover (Option): COVER-022
6. After using the system, return the stage to the center position and fix
the clutch levers. Do not place a heavy object on the stage.
7. Avoid using or storing the equipment under direct sunlight, high
temperature (over 40 °C), high humidity, excessive dust or vibrations.
8. Do not bend extremely, pull or step on the cables. Also take special
care in its distribution.
9. Never oil the XYZ guide
a
.
10. Before disposing of this product, be sure to follow the regulations
and rules of your local government.
Maintenance and storage
a
To Next Page
Loading...
Need help?
General
