Olympus STM7 - Page 25

To Next Page

To Previous Page

STM7

Brightfield/Darkfield reflected light illuminator

MM6C-RLAS

Brightfield reflected light illuminator

MM6C-KMAS

Fiber cable mount

Illuminator mount

Filter insertion slot

Polarizer insertion slot

Observation tube mount

Analyzer insertion slot

Revolving nosepiece mount dovetail

Fiber cable mount

Filter insertion slot

Polarizer insertion slot

Analyzer insertion slot

Observation tube mount

Brightfield/darkfield switch knob

Illuminator mount

Revolving nosepiece mount dovetail

Main Page

Table of Contents3
Introduction7
Releasing the Transport Lock7
Safety Precautions8
Nomenclature of Module19
Nomenclature of Operating Portions21
Operation Procedures28
Turning Power on28
Functioning of Modules28
X/Y/Z Display29
Focusing Unit (Manual Frame Only)30
Focusing Operation30
Adjusting the Coarse Focusing Knob Tension30
Hand Switch (Manual Frame Only)31
Controlling Illumination31
Resetting Counter Data of X-, Y- and Z-Axis32
Outputting Counter Data of X-, Y- and Z-Axis33
Counting Counter Data of X-, Y- and Z-Axis In-Half33
Focus Controller (Motorized Frame Only)34
Z-Axis Coarse Focusing34
Z-Axis Fine/Coarse Adjustment with Fine/Coarse Focusing Knob34
Controlling Illumination35
Resetting Counter Data of X-, Y- and Z-Axis37
Outputting Counter Data of X-, Y- and Z-Axis37
Counting Counter Data of X-, Y- and Z-Axis In-Half37
Setting Lower Software Limit38
Observation Tube39
Interpupillary Distance Adjustment (MM6-ETR)39
Diopter Adjustment39
Using the Eye Shades39
Replacing the Eyepiece Cross40
Switching the Light Path (MM6-ETR)40
Erect Image Monocular Observation Tube (MM6-EMO)40
Reflected Light Illuminator41
Switching the Light Path of Brightfield/Darkfield Reflected Light Illuminator (MM6C-RLAS)41
Using the Filters (MM6C-KMAS,MM6C-RLAS)41
Stage42
Moving the Specimen42
Clamping the Option and Jig Tool43
Adjusting the Parallelism of Specimen43
Replacing the Stage Glass43
Focus Navigator Unit44
Method of Focus44
Autofocus Unit (Motorized Frame Only)45
Autofocusing Modes45
Focusing Position Adjustment45
Measurement by Manual Readout in ONE SHOT Mode47
Measurement by Auto Readout in ONE SHOT Mode48
Measurement in TRACK Mode49
Foot Switch51
Basic Software51
External Processing Device51
Printer51
OBSERVATIONS (Using MM6C-KMAS or MM6C-RLAS)52
Reflected Light Brightfield Observation52
Reflected Light DIC Observation52
Mounting the Analyzer and Polarizer52
Setting the DIC Slider53
Observation Procedure53
Switching to Brightfield Observation53
Reflected Light Simplified Polarized Light Observation54
Observation Procedure54
Measurement55
Preparation (Setting DIP Switch and Rotary Switch)55
Measurement of Right-Angle Coordinates60
Measurement of Height (Motorized Frame Only)60
Measurement of Cylinders, Round Rods and Screws61
Assembly62
Assembly Diagram62
Detailed Assembly Procedures63
Inputting Setting Values (Maker Setting Mode)80
Mounting and Operating a Video System86
Adjusting the Tilt of the Camera87
Specifications89
Troubleshooting Guide96
Proper Selection of the Power Supply Cord100

Olympus STM7 - Page 25

Table of Contents

Related product manuals