3-2Pagina 3-2 di 57
MFOX04500910 FOX 45
3.2 Precaution
When loading the lift never exceed the capacity shown on
the ID plate on the lift.
Any modifications to the lift must be authorised by the
manufacturer.
The equipment must be used by specifically trained and
authorised personnel only.
Do not tamper with the lift's upstroke and downstroke
speeds, which have been adjusted by OMER during
factory tests in compliance with applicable legislation.
Always check the stability of hoisted vehicle.
In case of “recess-mounted version” before
carring out the final lowering with bypass key,
please censure you that people stay at security
distance.
Do not use the lift in the event of hindrances to
operation or hazardous conditions.
Check the lift carefully after long periods of
inactivity before putting it back into service.
The lift comes complete with an instruction manual
and warnings designed to last over time. Ask the
manufacturer for a replacement immediately if
damaged or destroyed.
O.ME.R. declines responsibility for any
inconvenience deriving from non-compliance with
the instructions for use.
To Next Page
Loading...
