1-1Pagina 1-1 di 57
MFOX04500910 FOX 45
Symbols used in the manual
The signage (ISO) indicated below is used within this manual to focus
attention on those operations that must be performed carefully in order
to guarantee safety during installation.
Indicates that, when performing the
operation, great care must be
taken to prevent the onset of
events that could cause serious
injury or damage.
Indicates that, when performing the
operation, an event (of an electrical
nature) could arise leading to injury
or damage.
Indicates that, during installation or
transport of system components,
suitable lift equipment must be
used and utmost attention applied.
Indicates that, during installation,
the operator crosses zones where
there is high risk of falling; always
be particularly careful.
Indicates that the indications or
instructions described in the text
must be followed to the letter. Non-
compliance with the indications can
be dangerous for the operator and
can damage the system.
Indicates that the specific activity or
operating sequence must be
avoided
To Next Page
Loading...
