4-1Pagina 4-1 di 57
MFOX04500910 FOX 45
4 INSTALLATION
4.1 Transport and handling
The packaged lift must only be transported using dedicated hoisting
equipment with a greater capacity than the lift to be handled.
The equipment is wrapped in bubble pack to protect the components
wooden crates or pallets are used in special cases.
PROCEED AS FOLLOWS:
protect the electric control panel from exposure to the elements
protect against blows and do not use the electronic control panel for
hoisting
protect the corners and ends of the piece to be transported with
suitable material (Bubble pack - cardboard).
harness using dedicated straps
To Next Page
Loading...
