Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
7-38
Maintenance
8.
Continue entering new values, as needed.
When finished, press the Back key to go
back to the Maint Mode Flow/Totals
screen.
9.
On the main Maint Mode Flow/Totals
screen, press the red Reset Tot function
key to reset the totalizer values to zero.
This does not affect the decimal
resolutions set in Step 6; they can only be
changed manually.
10.
a. When ready to reset the Maintenance
Mode totals, press OK and use the
Up and Down arrow keys to change
the status from Ready to Execute.
b. Press OK again to start the reset.
11.
When the reset is complete, the status
automatically returns to Ready. Press the
Back key to go back to the Maint Mode
Flow/Totals screen and continue in
Maintenance Mode, or the Home button to
return to the main menu.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English