Omni 7000 Series - Page 34

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
3-11
OMNICONNECT® Operations
3.
Select a product in the tree to display its configuration options in the screens on the right.
4.
a. Select the Fluid Type from the
drop-down list in the Fluid Setup
group.
b. Enter a name or identifier (up to 32
ASCII characters).
c. Enter a numeric identifier in the
Numeric Name group, as needed.
5.
In the center column of the Setup screen,
select the Density Method for this
product.
6.
a. Select how to handle neo-Pentane
from the AGA-8 neo-Pentane
Handling drop-down list.
b. Click the check box if you want to
enable the AGA-10 Calculation.
This selection turns on or off
multiple fields and tabs associated
with the selection, namely in the
far-right column of this screen and
in the 1994 Analysis tab.