Omni 7000 Series - Batch Operations

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
3-10
OMNICONNECT® Operations
10.
a. If the flow computer is equipped with
a Gas Chromatograph for liquid
applications (selected on the
Equipment List screen found on
Configure tree > General Setup item
> Equipment List tab), select Gas
Chromatograph on the tree.
11.
a. Fill in the information on all three gas
chromatograph screens.
b. When you are finished, click Apply to
save the changes.
12.
Gas Products
To configure gas fluid products, follow these instructions:
1.
In the Actions ribbon, click Configure.
2.
a. Select Fluid Products in the
Configure tree.
b. Expand the item to see the entire list
of products.
For gas applications, six products
can be configured. You do not have
to use or configure all of them.