Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
4-6
OMNICONNECT® Reports
To select and edit custom report templates, follow these instructions:
1.
In the Actions ribbon, click Configure.
2.
Click on the Report Setup option in the
Configure tree to display the report
template settings.
3.
a. In the Report Template Selection
group, select the templates you want
to use for each type of report. By
default, no custom report templates
have been imported into the flow
computer before shipping.
b. Click Apply to save your changes.
4.
In the Actions ribbon, click Report Editor.
5.
In the Report Template Editor tree, click
on the report template you want to
customize.
Unless a template has been imported, you
should see a blank screen in the
Formatted View tab.
If you choose either Template A or
B for any of the reports, you must
remember to import a custom
report template to generate
that report.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English