Reading and Verifying Character Strings
106
FQ2-S4 User’s Manual
5 You can register up to 10 versions of each character
(0-9 and A-Z).
6 Press − [Extraction reg.] on the right of the dis-
play.
7 Specify the region to extract and press [OK].
The measurement region can contain character strings
on up to four lines.
Each line can contain up to 32 characters.
8 Press [Extraction].
9 The extracted characters will be displayed on the up-
per left of the display.
10 Press [OK] to register the characters.
To Next Page
Loading...
