Reading and Verifying Character Strings
FQ2-S4 User’s Manual
4
Setting Up Inspections
107
Error Messages during Registration
• Failed to register data. Character format is wrong.
The format or the number of characters did not match between the read character string and the registered charac-
ter string. Correct the character string to register.
• Failed to register data. Character size is too small
You can register characters that are 30 × 30 pixels or larger in the dictionary. Change the settings of the Sensor to
increase the size of the characters.
• Extraction error
The characters could not be extracted. Correct the measurement data settings or the read region.
• Excess char. num
An attempt was made to register more than 10 characters. Delete the data that does not need to be registered.
Displaying Registered Characters
11 The characters are registered for the corresponding
character type.
1 To display the registered characters, select the char-
acters on the upper left of the display.
2 The registered characters will be displayed.
To Next Page
Loading...
