Reading and Verifying Character Strings
108
FQ2-S4 User’s Manual
Deleting Extracted Characters
Changing the Measurement Parameters
Extracting Characters Based on Specified Character Formats
1 On the display to add and edit characters, press
− [Individual reg.] on the right of the display.
2 Select the region to delete and press the [Delete] But-
ton.
3 Press the [OK] Button.
1 On the right of the display to add characters, press
− [Meas. Parameter] to enable changing the mea-
surement parameters.
1 To extract characters based on a specified character
format, press − [Modify chara.] on the right of the
display.
To Next Page
Loading...
