Omron FQ2-S4 - Page 465

Menu Tables
FQ2-S4 User’s Manual
463
Appendices
12
Inspection
Settings
Te ach
for Bar code
Insp. region Moves the measurement region or
adjusts the size of the measurement
region.
--- ---
Camera setup Same as Camera adjustments on the Image Tab Page. Scene
Meas. Parameter
Code
type
Sets the type of code to read. JAN/EAN/UPC (default), Code39,
Codebar, ITF, Code93, Code128/GS 1-
128, GS1 DataBar, or Pharmacode
Scene
Check
digit on/
off
(Except
for Phar-
macode)
Sets whether there is a check digit. Yes (default) or No Scene
Direction
(For
Pharma-
code
only)
Sets the direction in which to read. Horizontal mode or Vertical mode Scene
Reverse
on/off
(For
Pharma-
code
only)
Sets whether to use Reverse Mode. Yes or No (default) Scene
Timeout Sets the timeout time for read pro-
cessing.
1 to 9999 ms (default: 9999) Scene
Continuous test Same as [Continuous test] on the [Test] Tab Page. Scene
for 2D-code
Insp. region Moves the measurement region or
adjusts the size of the measurement
region.
--- ---
Camera setup Same as Camera adjustments on the Image Tab Page. Scene
Meas. Parameter
Code
type
Sets the type of code to read. DataMatrix (default), OR Code, Mic-
roQR Code, PDF417, or MicroPDF417
Scene
Reverse Sets a normal or reverse image. Normal or Reverse Scene
Code
color
(Except
for
PDF417,
MicroPD
F417)
Sets the code color. Block, White, or Auto (default) Scene
Shape
(for Data-
Matrix
Only)
Sets the code shape. Square (dafault) or Square or Rect. Scene
Timeout Sets the timeout time for read pro-
cessing.
1 to 9999 ms (default: 9999) Scene
Continuous test Same as [Continuous test] on the [Test] Tab Page. Scene
Menu command Description Setting range Data Refer-
ence