Menu Tables
464
FQ2-S4 User’s Manual
Inspection
Settings
Te ach
for 2D-code (DPM)
Insp. region Moves the measurement region or
adjusts the size of the measurement
region.
--- ---
Camera setup Same as Camera adjustments on the Image Tab Page. Scene
Meas. Parameter
Code
type
Sets the type of code to read. DataMatrix, QR Code, or Auto (default) Scene
Shape
(for Data-
Matrix
only)
Sets the code shape. Square, Rectangle, or Auto (default) Scene
QR Code
Model
(for QR
Code
only)
Sets the QR code model. Model 1, Model 2, or Auto (default) Scene
ECC
Level (for
QR Code
only)
Sets the error correction level (i.e., the
ECC level).
L (7%), M (15%0, Q (25%), H (30%), or
Auto (default)
Scene
Cell (for
DataMa-
trix and
QR Code
only)
Sets the number of cells in the code. For QR codes
21 × 21, 25 × 25, 29 × 29, 33 × 33, 37 ×
37, 41 × 41, 45 × 45, 49 × 49, 53 × 53,
57 × 57, or Auto (defalut)
For square data matrices
10 × 10, 12 × 12, 14 ×14, 16 × 16, 18 ×
18, 20 × 20, 22 × 22, 24 × 24, 26 × 26,
32 × 32, 36 × 36, 40 × 40, 44 × 44, 48 ×
48, 52 × 52, 64 64, or Auto (default)
For rectangular data matrices
8 × 18, 8 × 32, 12 × 26, 12 × 36, 16 × 36,
16 × 48, or Auto
Scene
Auto
length
(Except
for when
the num-
ber of
cells is
set to
auto-
matic for
data
matrices
or QR
codes.)
Sets whether the code size is detected
automatically.
Yes (default) or No Scene
Reverse Sets a normal or reverse image. Normal, Reverse, or Auto (default) Scene
Code
color
Sets the code color. Black, White, or Auto (default) Scene
Fast
mode
Sets whether to use the Fast Mode.
Reading time is reduced if Fast Mode
is used.
Yes or No (default) Scene
Timeout Sets the timeout time for read pro-
cessing.
0 to 9999 ms (default: 9999) Scene
Continuous test Same as [Continuous test] on the [Test] Tab Page. Scene
Menu command Description Setting range Data Refer-
ence
To Next Page
Loading...
