Menu Tables
468
FQ2-S4 User’s Manual
Inspection
Settings
Judgement
Result type
(Except for
OCR, 2D-code
(DPM), Edge
Position, Edge
Pitch, and
Labeling)
You can change the output form of the
measurement values.
Absolute value (default), Relative value,
or Ratio (Edge Position or Area only)
Scene p. 139,
p. 149,
p. 157,
p. 164,
p. 171,
p. 175
Display setting You can change the parameters of the
judgement conditions.
The names of the judgement conditions
are displayed.
Scene p. 138,
p. 148,
p. 156,
p. 163,
p. 170,
p. 174,
p. 179
p. 183
Auto
adjustment
(Except for
Labeling and
Edge Pitch)
Automatically adjusts the judgement
parameters by using actual work-
pieces which are considered as good
or faulty products.
OK Teach or NG Teach Scene p. 219
Menu command Description Setting range Data Refer-
ence
To Next Page
Loading...
