Omron NX-AD series - Page 156

7 Analog Output Units
7 - 8
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
*1. The default value and setting range of Ch Range Setting depend on the model. The default value and set-
ting range for each NX Unit are as follows.
*2. The descriptions of Ch Hold Value Setting are as follows.
NX Units Default value Setting range
NX-DA3203/DA3205 0 0
NX-DA3603/DA3605 2 2
Set value Setting description
0 Hold Last State
1 Low Limit
2 High Limit
3 User Count
4 Zero Count