Omron NX-AD series - 8 Troubleshooting; 8-1 How to Check for Errors; 8-2 Checking for Errors with the Indicators; 8-3 Checking for Errors and Troubleshooting on the Support Software

Relevant Manuals
6
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
Relevant Manuals
The table below provides the relevant manuals for the NX-series Analog I/O Units.
Read all of the manuals that are relevant to your system configuration and application to make the most
of the NX-series Analog I/O Units.
Other manuals, such as related product manuals, are necessary for specific system configurations and
applications. Refer to Related Manuals on page 27 for the related manuals.
Manual name Application
NX-series Analog I/O Units
User’s Manual for Analog Input
Units and Analog Output Units
*1
*1. From revision 05 of this manual, information on the NX-series Temperature Input Units (NX-TS) that
were included in previous revisions was moved to the following manual: NX-series Analog I/O Units User’s
Manual for Temperature Input Units and Heater Burnout Detection Units (Cat. No. W566). Accompanying that
change, the name of this manual was changed from the NX-series Analog I/O Units User’s Manual (Cat. No.
W522) to the NX-series Analog I/O Units User's Manual for Analog Input Units and Analog Output Units (Cat.
No. W522).
Learning how to use NX-series Analog Input Units and Analog Output Units
NX-series Data Reference Man-
ual
Referencing lists of the data that is required to configure systems with
NX-series Units