33
Revision History
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
Revision History
A manual revision code appears as a suffix to the catalog number on the front and back covers of the
manual.
Revision code Date Revised content
01 April 2013 Original production
02 June 2013 Corrected mistakes
03 September 2013 • Made changes accompanying release to unit version 1.1 of the Tem-
perature Input Units.
• Added information on the NX-TS02/TS04.
• Corrected mistakes.
04 April 2015 • Made changes accompanying the addition of the NX-series CPU Unit
and EtherNet/IP Coupler Unit.
• Corrected mistakes.
05 April 2016 • Deleted information on Temperature Input Units because it was moved
to the NX-series Analog I/O Units User’s Manual for Temperature Input
Units and Heater Burnout Detection Units (Cat. No. W566).
• Corrected mistakes.
06 October 2016 • Made changes accompanying the addition of NY-series IPC Machine
Controller Industrial Panel PCs and Industrial Box PCs.
• Made changes accompanying the addition of the NX-series NX1P2
CPU Unit.
• Corrected mistakes.
07 June 2017 • Made changes accompanying the upgrade of the NX-ECC203 unit ver-
sion to version 1.5.
• Made changes accompanying the upgrade of the NX-EIC202 unit ver-
sion to version 1.2.
• Corrected mistakes.
Cat. No.
W522-E1-07
Revision code
To Next Page
Loading...
Need help?
General
