27
Related Manuals
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
Related Manuals
The following table shows related manuals. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series Analog I/O
Units User’s Manual for
Analog Input Units and
Analog Output Units
*1
W522 NX-AD
NX-DA
Learning how to
use NX-series
Analog Input Units
and Analog Out-
put Units
The hardware, setup methods, and
functions of the NX-series Analog Input
Units and Analog Output Units are
described.
NX-series Data Refer-
ence Manual
W525 NX- Referencing lists of
the data that is
required to config-
ure systems with
NX-series Units
Lists of the power consumptions,
weights, and other NX Unit data that is
required to configure systems with
NX-series Units are provided.
NX-series System Units
User’s Manual
W523 NX-PD1
NX-PF0
NX-PC0
NX-TBX01
Learning how to
use NX-series
System Units
The hardware and functions of the
NX-series System Units are described.
Sysmac Studio Version
1 Operation Manual
W504 SYSMAC-
SE2
Learning about the
operating proce-
dures and func-
tions of the
Sysmac Studio
Describes the operating procedures of
the Sysmac Studio.
NX-IO Configurator
Operation Manual
W585 CXONE-
ALD-V4
Learning about the
operating proce-
dures and func-
tions of the NX-IO
Configurator.
Describes the operating procedures of
the NX-IO Configurator.
NJ/NX-series Trouble-
shooting Manual
W503 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning about the
errors that may be
detected in an
NJ/NX-series Con-
troller
Concepts on managing errors that may
be detected in an NJ/NX-series Con-
troller and information on individual
errors are described.
NY-series Troubleshoot-
ing Manual
W564 NY532-
NY512-
Learning about the
errors that may be
detected in an
NY-series Indus-
trial PC
Concepts on managing errors that may
be detected in an NY-series Controller
and information on individual errors are
described.
NX-series EtherCAT®
Coupler Unit User’s
Manual
W519 NX-ECC20 Learning how to
use an NX-series
EtherCAT Coupler
Unit and Ether-
CAT Slave Termi-
nals
The following items are described: the
overall system and configuration meth-
ods of an EtherCAT Slave Terminal
(which consists of an NX-series Ether-
CAT Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units through EtherCAT.
To Next Page
Loading...
Need help?
General
