Related Manuals
28
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
NX-series Ether-
Net/IP
TM
Coupler Unit
User’s Manual
W536 NX-EIC202 Learning how to
use an NX-series
EtherNet/IP Cou-
pler Unit and Eth-
erNet/IP Slave
Terminals
The following items are described: the
overall system and configuration meth-
ods of an EtherNet/IP Slave Terminal
(which consists of an NX-series Ether-
Net/IP Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units.
NX-series CPU Unit
Hardware User’s Man-
ual
W535 NX701- Learning the basic
specifications of
the NX-series
NX701 CPU Units,
including introduc-
tory information,
designing, installa-
tion, and mainte-
nance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NX701
CPU Unit system is provided along with
the following information on the CPU
Unit.
• Features and system configuration
• Overview
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
NX-series NX1P2 CPU
Unit Hardware User’s
Manual
W578 NX1P2- Learning the basic
specifications of
the NX-series
NX1P2 CPU Units,
including introduc-
tory information,
designing, installa-
tion, and mainte-
nance. Mainly
hardware informa-
tion is provided.
An introduction to the entire NX1P2
CPU Unit system is provided along with
the following information on the CPU
Unit.
• Features and system configuration
• Overview
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
NJ-series CPU Unit
Hardware User’s Man-
ual
W500 NJ501-
NJ301-
NJ101-
Learning the basic
specifications of
the NJ-series CPU
Units, including
introductory infor-
mation, designing,
installation, and
maintenance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NJ-series
system is provided along with the fol-
lowing information on the CPU Unit.
• Features and system configuration
• Overview
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
Use this manual together with the
NJ-series CPU Unit Software User's
Manual (Cat. No. W501).
NY-series IPC Machine
Controller Industrial
Panel PC Hardware
User’s Manual
W557 NY532- Learning the basic
specifications of
the NY-series
Industrial Panel
PCs, including
introductory infor-
mation, designing,
installation, and
maintenance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NY-series
system is provided along with the fol-
lowing information on the Industrial
Panel PC.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
Manual name Cat. No. Model numbers Application Description
To Next Page
Loading...
Need help?
General
