Omron NX-AD series - Page 31

29
Related Manuals
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
NY-series IPC Machine
Controller Industrial Box
PC Hardware User’s
Manual
W556 NY512- Learning the basic
specifications of
the NY-series
Industrial Box PCs,
including introduc-
tory information,
designing, installa-
tion, and mainte-
nance. Mainly
hardware informa-
tion is provided.
An introduction to the entire NY-series
system is provided along with the fol-
lowing information on the Industrial Box
PC.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ/NX-series CPU Unit
Software User’s Manual
W501 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning how to
program and set
up an
NJ/NX-series CPU
Unit.
Mainly software
information is pro-
vided.
The following information is provided
on an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3
language specifications
NY-series IPC Machine
Controller Industrial
Panel PC / Industrial
Box PC Software User’s
Manual
W558 NY532-
NY512-
Learning how to
program and set
up the Controller
functions of an
NY-series Indus-
trial PC
The following information is provided
on NY-series Machine Automation Con-
trol Software.
• Controller operation
• Controller features
• Controller settings
• Programming based on IEC 61131-3
language specifications
NJ/NX-series CPU Unit
Built-in EtherCAT® Port
User’s Manual
W505 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Using the built-in
EtherCAT port on
an NJ/NX-series
CPU Unit
Information on the built-in EtherCAT
port is provided.
This manual provides an introduction
and provides information on the config-
uration, features, and setup.
NY-series IPC Machine
Controller Industrial
Panel PC / Industrial
Box PC Built-in
EtherCAT® Port
User’s Manual
W562 NY532-
NY512-
Using the built-in
EtherCAT port on
an NY-series
Industrial PC
Information on the built-in EtherCAT
port is provided.
This manual provides an introduction
and provides information on the config-
uration, features, and setup.
NJ/NX-series Instruc-
tions Reference Manual
W502 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning detailed
specifications on
the basic instruc-
tions of an
NJ/NX-series CPU
Unit
The instructions in the instruction set
(IEC 61131-3 specifications) are
described.
NY-series Instructions
Reference Manual
W560 NY532-
NY512-
Learning detailed
specifications on
the basic instruc-
tions of an
NY-series Indus-
trial PC
The instructions in the instruction set
(IEC 61131-3 specifications) are
de
scri
bed.
Manual name Cat. No. Model numbers Application Description