1 Features and System Configuration
1 - 14
NX-series Analog I/O Units User’s Manual for Analog Input Units and Analog Output Units (W522)
1-5 Support Software
The Support Software that is used depends on the system configuration.
z Support Software for a System Configured with a CPU Unit
If your system is configured by connecting an NX Unit to a CPU Unit, the Sysmac Studio is used as
the Support Software.
z Support Software for a System Configured with a Slave Terminal
If your system is configured by connecting an NX Unit to a Communications Coupler Unit, refer to
the user’s manual for the Communications Coupler Unit for information on the Support Software.
Refer to A-5 Version Information with CPU Units on page A-55 or A-6 Version Information with Commu-
nications Coupler Units on page A-57 for information on the Support Software versions.
To Next Page
Loading...
