Omron NX Series - Page 106

Appendices
A - 40
NX-series Data Reference Manual (W525)
 Position Interface Units
NX Units Corresponding unit versions/versions
Model
Unit
version
Application with an NJ/NX/NY-series
Controller
*1
*1. Refer to the user’s manual for the EtherNet/IP Coupler Units for information on the unit versions of EtherNet/IP Units that
are compatible with EtherNet/IP Coupler Units.
Application with a CS/CJ/CP-series PLC
*2
*2. Refer to the user’s manual for the EtherNet/IP Coupler Units for information on the unit versions of CPU Units and
EtherNet/IP Units that are compatible with EtherNet/IP Coupler Units.
EtherNet/IP
Coupler
Unit
CPU Unit or
Industrial
PC
Sysmac
Studio
EtherNet/IP
Coupler
Unit
Sysmac
Studio
NX-IO Con-
figurator
*3
*3. For connection to an EtherNet/IP Coupler Unit with unit version 1.0, You can connect only to the peripheral USB port on
the EtherNet/IP Coupler Unit. You cannot connect with any other path. If you need to connect by another path, use an
EtherNet/IP Coupler Unit with unit version 1.2 or later.
NX-EC0112 Ver. 1.1 Ver. 1.2 Ver. 1.14 Ver. 1.19 Ver. 1.0 Ver. 1.10 Ver. 1.00
Ver. 1.2 Ver. 1.13
NX-EC0122 Ver. 1.0 Ver. 1.10
Ver. 1.1
Ver. 1.2 Ver. 1.13
NX-EC0132 Ver. 1.1 Ver. 1.10
Ver. 1.2 Ver. 1.13
NX-EC0142 Ver. 1.0 Ver. 1.10
Ver. 1.1
Ver. 1.2 Ver. 1.13
NX-EC0212 Ver. 1.1 Ver. 1.10
Ver. 1.2 Ver. 1.13
NX-EC0222 Ver. 1.0 Ver. 1.10
Ver. 1.1
Ver. 1.2 Ver. 1.13
NX-ECS112 Ver. 1.0 Ver. 1.10
Ver. 1.1
Ver. 1.2 Ver. 1.13
NX-ECS212 Ver. 1.0 Ver. 1.10
Ver. 1.1
Ver. 1.2 Ver. 1.13
NX-PG0112 Ver. 1.1 --- --- --- --- --- ---
Ver. 1.2
Ver. 1.3
NX-PG0122 Ver. 1.0
Ver. 1.1
Ver. 1.2
Ver. 1.3
NX-PG0232-5 Ver. 1.2
Ver. 1.3
NX-PG0242-5 Ver. 1.2
Ver. 1.3
NX-PG0332-5 Ver. 1.2
Ver. 1.3
NX-PG0342-5 Ver. 1.2
Ver. 1.3