Omron Sysdrive RX Series - Page 77

3-28
3-7 Parameter List
3
Operation
RUN mode, Acceleration/Deceleration functions
A085 RUN mode selection
00: Normal operation
01: Energy-saving operation
02: Automatic operation
00 No No 
4-36
A086
Energy-saving
response/accuracy
adjustment
0.0 to 100.0 50.0 Yes Yes 
A092 Acceleration time 2
0.01 to 99.99
100.0 to 999.9
1000. to 3600.
15.00
Yes Yes s
4-37
A292
* 2nd acceleration
time 2
15.00
A392
* 3rd acceleration
time 2
15.00
A093 Deceleration time 2 15.00
A293
* 2nd deceleration
time 2
15.00
A393
* 3rd deceleration
time 2
15.00
A094
2-step acceleration/
deceleration
selection
00: Switched via multi-function input 09
(2CH)
01: Switched by setting
02: Enabled only when switching forward/
reverse
00
No No 
A294
* 2nd 2-step
acceleration/
deceleration
selection
00
A095
2-step acceleration
frequency
0.00 to 99.99
100.0 to 400.0
0.00
No No Hz
A295
* 2nd 2-step
acceleration
frequency
0.00
A096
2-step deceleration
frequency
0.00
No No Hz
A296
* 2nd 2-step
deceleration
frequency
0.00
A097
Acceleration pattern
selection
00: Line
01: S-shape curve
02: U-shape curve
03: Inverted U-shape curve
04: EL-S-shape curve
00 No No 
4-38
A098
Deceleration pattern
selection
00 No No 
Parameter
No.
Function name Monitor or data range
Default
setting
Changes during
operation
Unit Page
Normal
b031 = 10
* 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001
to C008.