Omron SYSMAC CP Series Instruction & Reference Manual

2 Instructions
2-306
CP1E CPU Unit Instructions Reference Manual(W483)
DI
Applicable Program Areas
Flags
Function
DI(693) is executed from the main program to temporarily disable all interrupt tasks (I/O interrupts,
scheduled interrupts).
Precautions
All interrupt tasks will remain disabled until EI(694) is executed.
DI(693) cannot be executed from an interrupt task.
Sample program
Instruction Mnemonic Variations
Function
code
Function
DISABLE INTERRUPTS DI @DI 693
Disables execution of all interrupt tasks except the
power OFF interrupt.
Symbol
DI
Area Step program areas Subroutines Interrupt tasks
Usage OK OK Not allowed
Name Label Operation
Error Flag P_ER • ON if DI(693) is executed from an interrupt task.
• OFF in all other cases.
When CIO 0.00 is ON in the following example,
DI(693) disables all interrupt tasks.
DI(693)
Disables execution of
all interrupt tasks
0.00
DI

Omron SYSMAC CP Series Specifications

General

Manufacturer	Omron
Mounting	DIN Rail
Category	Programmable Logic Controller (PLC)
Programming Languages	Function Block Diagram, Structured Text, Sequential Function Chart, Instruction List
Communication Protocols	EtherNet/IP, DeviceNet, CompoNet, RS-232C, RS-485
I/O Points	10 to 160
Power Supply	100-240 VAC or 24 VDC
Operating Temperature	0°C to 55°C
Humidity	10% to 90% (non-condensing)
Vibration Resistance	10 to 57 Hz, 0.075 mm amplitude
Shock Resistance	147 m/s², 3 times in each direction (X, Y, Z)