Omron SYSMAC CP Series Instruction & Reference Manual

2
CP1E CPU Unit Instructions Reference Manual(W483)
CP1E CPU Unit Manuals
Information on the CP1E CPU Units is provided in the following manuals.
Refer to the appropriate manual for the information that is required.
This Manual
Mounting and
Setting Hardware
1
2
3
4
5
6
7
Wiring
Connecting
Online to the PLC
Software Setup
Creating the Program
Checking and
Debugging Operation
Maintenance and
Troubleshooting
CP1E CPU Unit Hardware
User’s Manual(Cat. No. W479)
CP1E CPU Unit Software
User’s Manual(Cat. No. W480)
· Wiring methods for the power supply
· Wiring methods between external I/O devices
and Expansion I/O Units or Expansion Units
Connecting Cables for CX-Programmer
Support Software
Error codes and remedies if a problem occurs
Procedures for connecting the
CX-Programmer Support Software
Software setting methods for the CPU
Units (PLC Setup)
· Checking I/O wiring, setting the Auxiliary Area
settings, and performing trial operation
· Monitoring and debugging with the
CX-Programmer
· Program types and basic information
· CPU Unit operation
· Internal memory
· Built-in CPU functions
· Settings
· Names and specifications of the parts of all Units
· Basic system configuration for each CPU Unit
· Connection methods for Expansion I/O Units
and Expansion Units
CP1E CPU Unit Instructions
Reference Manual(Cat. No. W483)
Detailed information on
programming instructions

Omron SYSMAC CP Series Specifications

General

Brand	Omron
Model	SYSMAC CP Series
Category	Computer Hardware
Language	English