ix
About this Manual:
This manual describes the operation of the V600/620 RFID System and includes the sections described
below.
Please read this manual completely and be sure you understand the information provided before attempt-
ing to operate the system.
Section 1 Provides a general introduction to the RFID System and the ID Controller.
Section 2 Provides the names and functions of the ID Controller parts and also provides the ID Control-
ler’s dimensions.
Section 3 Provides the DIP switch settings and the wiring instructions required before operating the ID
Controller.
Section 4 Provides information on the communications aspects of the RFID System.
Section 5 Provides the information required to test and maintain the performance of the RFID System.
Appendix A Provides a list containing JIS 8 codes and ASCII.
Appendix B Provides instructions on the use of the auto read/auto write commands.
Appendix C Provides the specifications and ratings of the ID Controller.
WARNING Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
!
To Next Page
Loading...
Need help?
General
