5-1SectionTest Run
51
Communications Test with Host Computer
Communications testing between the ID Controller and the host computer can
be performed by using the test command, so that connections of the cables and
communications operation can be checked before the test run of the overall sys-
tem.
1, 2, 3... 1. Create a simple communications program on the host computer and trans-
mit the test command (TS).
2. If the communication system is normal, the ID Controller returns the test
data it has received as is.
TSx x x_x …… x x x ∗
TSx x x_x …… x x x ∗
Frame 1
Response of host computer
Response of test data
Test data: 262 characters max.
Reception
Transmission
To Next Page
Loading...
Need help?
General
