75
Appendix D
Conformity to Standards
EC Directives
We hereby declare that the following products are in conformity with the requirements of the EC Directive listed
below:
Identification System
V600-CD1D-V3 ID Controllers
V600-H- Read/Write Heads
V600-D- Data Carriers
No. of Directive: 89/336/EEC
Title of Directive: Electromagnetic Compatibility
The above referenced products conform to the following standards:
Electromagnetic Compatibility
EMI (Electromagnetic Interference):
Radiated EN50081-2: 1994 / EN55011: 1991
EMS (Electromagnetic Susceptibility):
Electrostatic Discharge EN50082-2: 1995 / EN61000-4-2: 1995
RF Electromagnetic Field EN50082-2: 1995 / ENV50140: 1994
RF Common Mode EN50082-2: 1995 / ENV50141: 1994
Electrical Fast Transient Burst EN50082-2: 1995 / EN61000-4-4: 1995
Power-Frequency Magnetic Field EN50082-2: 1995 / EN61000-4-8: 1993
Technical Data
Intended Environment: Industrial
1. Type designation: V600-CD1D-V3
2. Host interface: RS-232C
3. Number of Read/Write Heads connectable: 1 channel
4. Rated power supply voltage: 24 VDC
5. Acceptable power supply voltage: 20.4 to 26.4 VDC
6. Power consumption: 7.2 W max.
7. Dielectric strength: 1,000 VAC, between live parts and protective grounding conductor
8. Ambient air temperature: Operating –10° to 55°C
Storage –25° to 65°C
9. IP rating (IEC60529): IP30 (for inner-panel installation)
10. Pollution rating: 2 (controlled environment)
11. Electromagnetic Compatibility (EMC)
a) Field Withstandability: 10 V/m
b) RF Common Mode: 10 V
c) Electrostatic Discharge Withstandability: 4 kV (Contact)
8 kV (Air)
d) Fast Transient Withstandability: 2 kV (DC power)
1 kV (Signal line)
e) Radiated Emission: Class A, Group 1
To Next Page
Loading...
Need help?
General
