3
CIDRW System
User’s Manual
INTRODUCTION
Precautions in using the product
INTRODUCTION
The following signal words are used in this manual.
The following alert symbol is used in this manual.
The following alert statements apply to the products in this manual. Each alert statement also appears at the
locations needed in this manual to attract your attention.
Please observe the following precautions for safe use of the products.
• Do not allow water to enter or insert wires through gaps in the case. This could cause fire or electric shock.
• In the event of a malfunction, stop using the product immediately, turn off the power, and consult your
OMRON dealer.
• Dispose of this product as industrial waste.
• Do not remove the CIDRW Head from the Amplifier Unit while power is being supplied.
Please observe the following precautions to prevent failure to operate, malfunctions, or undesirable effects on
product performance.
■ Installation Site
Install the product at a location where:
• It is not exposed to direct sunlight.
• It is not exposed to corrosive gases, dust, metal chips, or salt.
• The working temperature is within the range stipulated in the specifications.
Meanings of Signal Words
!WARNING
Indicates a potentially hazardous situation which, if not avoided, will result in minor
or moderate injury, or may result in serious injury or death. Additionally there may
be significant property damage.
Meanings of Alert Symbols
Indicates general prohibitions for which there is no specific symbol.
Alert Statements in this Manual
!WARNING
The product is not designed or rated for ensuring safety of persons.
Do not use it for such purposes.
Precautions for Safe Use
Precautions for Correct Use
To Next Page
Loading...
Need help?
General
