EasyManuals Logo

Onkyo HT-S5400 User Manual

Onkyo HT-S5400
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
44
En
Late Night Function
Late Night
For Dolby Digital and Dolby Digital Plus sources, the
options are:
` Off
` Low:
Small reduction in dynamic range.
` High:
Large reduction in dynamic range.
For Dolby TrueHD sources, the options are:
` Auto
:
The Late Night function is set to “On” or “Off
automatically.
` Off
` On
Turn this setting on to reduce the dynamic range of Dolby
Digital material so that you can still hear quiet parts even
when listening at low volume levels—ideal for watching
movies late at night when you don’t want to disturb
anyone.
Note
The effect of the Late Night function depends on the material
that you are playing and the intention of the original sound
designer, and with some material there will be little or no effect
when you select the different options.
The Late Night function can be used only when the input source
is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.
The Late Night function is set to “Off” when the AV receiver is
set to Standby. For Dolby TrueHD sources, it will be set to
Auto”.
Music Optimizer
Music Optimizer
` Off
` On
Turn this setting on to enhance the sound quality of
compressed music files. Use it with music files that use
“lossy” compression, such as MP3.
Tip
Alternatively, you can use the AV receiver’s MUSIC
OPTIMIZER.
Note
The Music Optimizer function only works with PCM digital
audio input signals with a sampling rate below 48 kHz and
analog audio input signals. The Music Optimizer is disabled
when the Direct listening mode is selected.
The setting is stored individually for each input selector.
•The M.Opt indicator will light ( page 8).
CinemaFILTER
Cinema Filter
` Off
` On
Turn this setting on to soften overly bright movie
soundtracks, which are typically mixed for reproduction in
a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Digital
Plus, Dolby TrueHD, Dolby Pro Logic IIx Movie, Dolby
Pro Logic II Movie, Dolby Pro Logic IIz Height,
Multichannel, DTS, DTS-ES, DTS Neo:6 Cinema, DTS
96/24, Neo:6, DTS-HD High Resolution Audio, DTS-HD
Master Audio and DTS Express.
Note
The CinemaFILTER may not work when used with certain input
sources.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-S5400 and is the answer not in the manual?

Onkyo HT-S5400 Specifications

General IconGeneral
Disc types supportedNo
Optical disc player type-
Apple docking compatibilityiPhone, iPod
Audio decodersDolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio
RMS rated power- W
Audio output channels7.1 channels
Audio formats supportedAAC, FLAC, MP3, WMA
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.08 %
FM radioYes
AM band range530 - 1710 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Preset stations quantity40
Front speaker type2-way
Front speaker impedance6 Ω
Front speaker peak power130 W
Front speaker frequency range55 - 50000 Hz
Satellite speaker frequency range80 - 20000 Hz
Subwoofer peak power120 W
Subwoofer frequency range25 - 150 Hz
Product colorBlack
HDMI in4
USB version2.0
Audio (L/R) in6
Composite video in5
SCART ports quantity0
Number of HDMI outputs1
Component video (YPbPr/YCbCr) in2
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)480 W
Package weight34000 g
Weight and Dimensions IconWeight and Dimensions
Main unit weight9000 g
Subwoofer weight10800 g
Center speaker weight2400 g
Satellite speaker weight1000 g
Main unit dimensions (WxDxH)435 x 328 x 150 mm
Subwoofer dimensions (WxDxH)317.5 x 398 x 463 mm
Front speaker dimensions (WxDxH)1550 x 170 x 375.5 mm
Center speaker dimensions (WxDxH)420 x 121 x 115 mm
Satellite speaker dimensions (WxDxH)115 x 96 x 230 mm

Related product manuals