25
En
Turning On & Basic Operatio ns
Basic Operations
Tip
• After a certain period of warming up, the temperature of the
preamplifier’s components and internal temperature are
stabilized, and the sound will soften.
• The previous input source will appear on the display when the
preamplifier turned on.
Note
• The preamplifier remembers the state when power was
previously turned off, and returns to the state.
Note
• See “Setting ASb (Auto Standby)” for the auto standby function
(➔ 35).
Turning On/Off the Preamplifier
POWER
ON/STANDBY
8
Turning On the Preamplifier
1
Set POWER to the ON position (^) on the front
panel.
2
Press 8 to turn on the preamplifier.
The preamplifier comes on, the display lights, and the
Standby LED goes off.
You can also use preamplifier’s ON/STANDBY.
Turning Off the Preamplifier
1
Press 8 to set the preamplifier to Standby.
The preamplifier will enter Standby mode, and the
Standby LED lights.
You can also use preamplifier’s ON/STANDBY.
2
To completely shut down the preamplifier, set
POWER to the OFF position (@).
To Next Page
Loading...
