31
En
Playing Music Files on the PC
This section explains how to play music files on a PC
through the preamplifier.
To playback the audio data stored on your PC by using the
preamplifier via USB port connection, you must install the
driver on your PC from the Onkyo website.
For the installation procedure, see the Onkyo Web site.
Note
• If you play incompatible file formats, then sound may not be
output depending on the player software on the PC.
• If the sampling rate is greater than 96 kHz, no sound will come
out of digital outputs.
• The USB selector on the display flashes if you unplug the USB
cable.
• If the USB connector of your PC does not support the high-speed
2.0 standard, then audio is not output.
Connecting the PC
PC
USB
Installing a USB Driver Playing Music Files on the PC
1
Press USB to switch the input to the USB selector.
You can also use preamplifier’s Multi jog dial.
2
Play music files on the PC.
USB
To Next Page
Loading...
