Onkyo P-3000R User Manual

5
En
Features
• DIDRC (Dynamic Intermodulation Distortion
Reduction Circuitry)
• Separate Digital/Analog Circuitry
• Separate Massive Transformers for
Digital/Analog Circuitry (Toroidal
Transformer for Analog Circuitry)
• Separate Anti-Vibration Aluminum Panels for
Top, Front, and Sides
• Side-mounted Circuit Board Construction to
Reduce Vibration
• PLL Ultra-Low Jitter Technology
• Sampling Rate Converter (Up to 192 kHz)
• Separate TI (Burr-Brown) 192 kHz/32-Bit
DACs (PCM1795) for L/R Channels
• Direct Mode
• Tone Control (Bass/Treble)
• Independent Headphone Amplifier
• Discrete Phono Equalizer
• Phono Input (MM)
• USB Digital Input for 192 kHz/32-Bit HD
Audio from PC
*
• AES/EBU Balanced Digital Input with XLR
Connector
• 5 Digital Inputs (2 Optical, 2 Coaxial and 1
AES/EBU) and 1 Optical Output
• Separate L/R Bi-Amping-Capable Pre-Outs
• Gold-Plated, Machined Solid Brass,
19 mm-Pitch Audio Terminals
• 12 V Trigger Out
• Display Dimmer (Normal/Dim/Off)
*
Playback of PC audio requires dedicated software
that can be downloaded from an Onkyo website.

Onkyo P-3000R Specifications

General

Output level	0.001 mV
Amplifier class	-
Frequency range	5 - 100000 Hz
Output impedance	330 Ω
Input sensitivity	200 mV
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.005 %
AC (power) in	Yes
Audio (L/R) in	5
USB 2.0 ports quantity	1
Digital audio optical in	2
Speakers connectivity type	RCA
Purpose	Home
Product color	Silver
Volume control	Rotary
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	29 W
Package weight	12500 g

Weight and Dimensions

Depth	333.1 mm
Width	435 mm
Height	99 mm
Weight	11000 g