OnRobot RG6 - Page 37

Operation
37
Function name:
OR_Gecko_padSt(instance)
Name
Type
Description
Input:
instance
integer
1: single or primary - in dual configuration
2: secondary in dual configuration"
Output:
-
integer
0: pads are good
1: pads are worn-out
Description:
Checks the pads worn-out state.
Example:
instance = 1
CallProc OR_Gecko_padSt(instance)
Function name:
OR_Gecko_padPos(instance)
Name
Type
Description
Input:
instance
integer
1: single or primary - in dual configuration
2: secondary in dual configuration"
Output:
-
integer
0: pads are moved in
1: pads are moved out
Description:
Checks the pads position.
Example:
instance = 1
CallProc OR_Gecko_padPos(instance)