Sample Log 2 – Failed Standalone Verification (source unreadable)
Note: All log sections are collapsed except for the Drive and Partition sections.
If TD4 detects any bad sectors on the source drive, it adds a section at the end of the
job log. This additional section lists the sector address and the number of sectors of
each unreadable region of the source drive. As an example, the following forensic
log read error entry means that an error was encountered in at least one of the 64
Chapter 4 Using TD4
74
OpenText™ Tableau™ Forensic TD4 Duplicator
ISTD230100-UGD-EN-1
To Next Page
Loading...
