Opera Q9 - General Settings; Time Setting; Display off

LOAD SETTING
7
NO CORRECTION
GENERAL SETTINGS
EXIT
TIME SETTING
DISPLAY OFF
STANDBY
REMOTE PROBE SETTING
LANGUAGE SETTING
GENERAL SETTINGS
LOGS
SERVICE
BUZZER ON/ OFF
TIME SETTING
17/07/2013
17:01
THURSDAY
DISPLAY OFF
ON
EXIT
38
ENGLISH
LOAD SETTING
7
NO CORRECTION
To increase or decrease the parameter set, operate on the [+] and [-] buttons respectively. The percentage correction relative to
each set is also displayed in the lower part of the screen.
VENTILATION SETTING Setting not necessary
GENERAL SETTINGS
Allows access to the system general settings.
Press the [+] and [-] buttons to scroll the menu
To conrm the choice of the user menu desired, press the
button. EXIT submenu: escape from the GENERAL SETTINGS to
go back to the user menu screen.
GENERAL SETTINGS
EXIT
TIME SETTING
DISPLAY OFF
STANDBY
REMOTE PROBE SETTING
LANGUAGE SETTING
GENERAL SETTINGS
LOGS
SERVICE
BUZZER ON/ OFF
TIME SETTING
17/07/2013
17:01
THURSDAY
To modify the date and time settings, press the [+] and [-] buttons; to pass to the next setting, press the button. To exit and
go back to the previous screen, press the
button for more than 3 seconds.
DISPLAY OFF
ON
TIME SETTING
Allows to set the date and time.
DISPLAY OFF
Allows the deactivation of display switch-o. If a synchronised radio command is present, by deactivating this function, the
display of the same remains constantly active and lit only when it is positioned on the charging base.