Using the appropriate tool, operate the scrapers
located at the front of the stove once a day (to ensure
eciency over time) (see Figure on side A and B)
B
A
MAINTENANCE
NOTES ON MAINTENANCE
Inspection and maintenance activities must be performed by specialized technicians who are familiar with the instructions in
this manual.
Before performing any type of operation, make sure that:
The power cable is unplugged since the stove could be programmed to start.
Every part of the stove/insert is cold.
The ashes are completely cold.
Periodically inspect (depending on the frequency of use) the tray positioned under the smoke motor. Access via the
door positioned inside the front right-hand ash collection tray. When required use a suction device.
ATTENTION
MAKE SURE THE STOVE/INSERT, INTAKE VENTS AND CHIMNEY ARE CLEANED AND CHECKED BY SPECIALIZED
PERSONNEL EVERY YEAR.
DAILY CLEANING BY THE USER
The stove/insert user must perform daily cleaning with maximum care after having read the instructions regarding the
procedure, which are included in this manual.
SCRAPERS
To Next Page
Loading...