11
Model 72 User Manual - OPEX Corporation
Desktop height operator adjustable
The Model 72 desk assembly has an optional electric lift
system, which allows you to adjust the height of the
desktop work surface for convenience and comfort. It is
enabled by a machine parameter. The ability to adjust the
height is disabled if the machine is running or if the
interlocks are tripped.
Note: Machines without the optional electric lift system will have heavy duty
wheels on the right side, and regular feet on the left side.
To raise or lower the desk
This feature is only available on a machine with the option lift system installed
and enabled.
1 When the LIFT SYSTEM machine parameter is enabled, the arrows on the
Login, Run and Pre-Run screens alert you that it is possible to raise or
lower the desktop work surface (see Figure 1).
Figure 1: Lift system enabled
Note: If the LIFT SYSTEM machine parameter is not enabled, you will not see
the arrows on the Login, Run and Pre-Run screens.
2 When the arrows appear on the LCD screen, you can use the Up and Down
buttons on the keypad to adjust the table height. Press and hold the Up or
Integral mailrack option
• Holds mail tray. Pushes in to fit flush below
conveyor when not in use.
Accommodates
wheelchair access
Tuesday, February 23, 2010 11:14 A.M.
MODEL 72
OPEX CORPORATION
Press ENTER to log in.
Arrows appear
when lift system
is enabled
To Next Page
Loading...