Opex Falcon - Page 59

59
Falcon User Manual - Remittance Processing - OPEX Corporation
4 When finished, press the Rescan Feeder button again.
The slot will no longer be illuminated and feeding will resume at the auto-
feeder
To use the Rescan Feeder with multi-feed detection in the event of a jam:
1 When the Rescan Feeder slot is flashing, press and hold the Rescan
Feeder button until the Rescan Feeder slot begins to flash rapidly.
2 Wait for the jam dialog to disappear.
3 Inject the item(s) one at a time into the slot.
4 When finished, press the Rescan Feeder button again.
5 The slot will no longer be illuminated and feeding will resume at the auto-
feeder.
Using the Rescan Feeder when the machine is paused
If the operator pauses the machine, the Rescan Feeder slot will flash blue at a
0.5 second interval; alerting the operator that it may be selected to inject a
single or multiple items into the machine. If the operator activates the Rescan
Feeder, the slotted opening in the scan bed cover will become solidly lit blue;
alerting the operator that the Rescan Feeder is now active and the machine
expects items to be injected there.
To use the Rescan Feeder without Multi-Feed detection during the
paused state:
1 When the Rescan Feeder slot is flashing, press the Rescan Feeder button.