Opex Falcon - Adjusting Image Quality

56
Falcon User Manual - Remittance Processing - OPEX Corporation
Figure 15: Assigning a page sub-type
3 Scan the item.
Adjusting the image quality
Fine tune the quality of the item images by pressing Adjust on the Run screen.
The Adjust Capture Parameters screen will appear, where you can modify the
gamma, brightness and dropout colors for all or one image.
Figure 16: Adjust Capture Parameters screen
Table 6: Adjust Capture Parameters screen buttons
Gamma
When enabled, the Gamma panel allows you to adjust the
balance between bright and dark areas of the image.
Brightness
Adjust the brightness of the item images from Light to Dark.
Press a button to adjust the brightness. The default is Normal.
Dropout
Remove a color (Red, Green, Blue, or White) from the item
image. The default is White.
To use this feature, the items must be printed with a specific
dropout color.
Adjust All/
Adjust One
Select Adjust All to apply these changes to all the items in the
current job, or Adjust One to make the adjustments only to the
next item scanned.
Defaults Return to the default capture parameters.