SETUP MENU OPTIONS
56
x OSD Position – Allows you to set the display position for the on-screen display (OSD).
When the OSD Position is set to 0, the OSD is shown at the top and bottom of the video
screen. When it is set at a value between 1 and 5, the OSD is shifted towards the centre of
the video screen.
Similar to the subtitle shift setting above, the OSD Position feature is helpful for customers
using a 2.35:1 “Constant Image Height” video projection system.
x OSD Mode – Allows you to select how long the on-screen displa
y (OSD) information, such
as playback operation icons (PAUSE, STOP, SKIP, etc.), stays on the TV screen.
Normal – OSD information stays on the TV screen until the user cancels it.
Minimal – OSD information stays on the TV screen for a few seconds and then
disappears. The front panel display still maintains the selected display information.
Remaining – OSD information stays on the TV screen until the user cancels it. By
default, displays remaining time instead of elapsed time.
Off – No OSD information shows on the TV screen unless the user presses the INFO
button. This mode is not recommended for daily use.
x Angle Mark (On/Off) – Turns on/off the display of the angle icon when a DVD or Blu-ray
Disc with multiple angles is played. Keeping the angle mark off avoids distraction from
normal movie watching.
x Screen Saver – Allows you to turn on/off the screen saver function. The screen saver is
designed to minimize burn-in concerns for plasma and CRT display devices.
On (recommended) – After about 3 minutes of inactivity, the player will show an
animated OPPO logo moving on a black background. This allows most areas of the
screen time to rest and gives all
areas an equal opportunity to refresh.
Off – The screen saver will not be activated. Only use this option if your TV does not
have any burn-in issues.
Energy Saver – Video output will be turned off after 3 minutes of inactivity. Many
projectors and LCD TVs will go into a standby or sleep mode and turn off their projection
lamp or LCD backlight lamp, thus saving energy and prolonging the lamp life. When you
press any button on the OPPO remote control or the play
er’s front panel, the screen
saver will be canceled and video output will be restored. If your TV is already in standby
or sleep mode, you may need to wake up the TV by pressing a button on its remote or
control panel.
To Next Page
Loading...
