8
1. Start REDSCAN Manager.
2. Enter User ID and Password. Default settings are REDSCAN and OPTEX.
If Windows Firewall Message appears, check all 3 boxes and allow the access.
3. If REDSCAN Manager is started for the first time, Initial Settings are required.
(1) Enter preferable name of target REDSCAN.
(2). Select model name of the target.
(3). Enter IP address of the target. Default IP address of main port of REDSCAN mini is 192.168.0.126.
(4). lick Next.
(5) If the settings are ok, click Complete.
To Next Page
Loading...
